1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Jotul Cast Iron Stoves
    Woodstock Soapstone Stoves
    Hearth and Home (QuadraFire and Harman Stoves)

Search Results

Search Again
Page 1 of 8
  1. maglite67
    Post

    Harman Accentra Control Board software update

    no harman is always changing their boards and now the new boards everything is soldered onto it where your board has a logic chip in it thats...
    Post by: maglite67, Feb 2, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  2. maglite67
    Post

    Question for quadrafire techs on MT Vernon AE stoves

    I'm in Wisconsin and work for ESES
    Post by: maglite67, Feb 2, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  3. maglite67
    Post

    Hartman xxv auger noises

    if it's once in awhile it's ok if it's every time check your pellet length if all are over 1 1/2" thats your problem if the length is ok then it's...
    Post by: maglite67, Feb 1, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  4. maglite67
    Post

    castile thermostat question

    look at it as a low med high space heater with no idea what size room it's in but could be a cool add on to a stove if you figure it out. would need...
    Post by: maglite67, Feb 1, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  5. maglite67
    Post

    Lack of Harman P68 Status Blinks

    5 blinks is failed ignition should throw if stove tried to refire.
    Post by: maglite67, Feb 1, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  6. maglite67
    Post

    castile thermostat question

    can't be done unless you get a monkey to operate the switch while your away.
    Post by: maglite67, Feb 1, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  7. maglite67
    Post

    cement board question

    r or k value of the tile is enough for any stove
    Post by: maglite67, Feb 1, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  8. maglite67
    Post

    cement board question

    I think your talking about the wood corner I would fill it with bondo and sand to a perfect corner will not shrink and is sandable then tile over it.
    Post by: maglite67, Feb 1, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  9. maglite67
    Post

    Quiet Harman replacement fans

    we are now taking the p series motors apart and siliconing the housing to dampen vibrations
    Post by: maglite67, Feb 1, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  10. maglite67
    Post

    Question for quadrafire techs on MT Vernon AE stoves

    What i'm finding on the stoves that burn out ignitors is they are installed wrong you can not go over the rail the autoclean will pull on the wire...
    Post by: maglite67, Feb 1, 2012 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  11. maglite67
    Post

    Crack in my firebox Summer's Heat 55-SHP10

    Another idea is the stove is really dirty and air takes path of least resistance all the heat is concentrated on this one spot.
    Post by: maglite67, Dec 1, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  12. maglite67
    Post

    Has anybody else tryed this?

    I use a torch works every time
    Post by: maglite67, Nov 1, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  13. maglite67
    Post

    building codes for pets?

    cat hair comes out in one big clump!!!! then you get heat again
    Post by: maglite67, Nov 1, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  14. maglite67
    Post

    Opinons Please... Enviro Empress or St Croix Hastings

    The st croix will be a bit noisy but over a 10 year run will be cheaper in repairs. The enviro is very quiet but has high replacement part costs....
    Post by: maglite67, Nov 1, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  15. maglite67
    Post

    Turned the pellet stove way up to Heat setting 3 last night. Anyone else have it up high?

    I find it funny how people figure out how many pounds they use by feed rate and not what really heats a house. You have to over come the heat loss...
    Post by: maglite67, Nov 1, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  16. maglite67
    Post

    Harman Accentra Error Code #6 Again!!

    sounds like the fresh air is restricted. if there is smoke in the hopper check the feed system over good. Pull the slide plate make sure there is...
    Post by: maglite67, Oct 31, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  17. maglite67
    Post

    Harman Accentra Error Code #6 Again!!

    Check the left side there is a port behind the left baffle. That square tube makes a 90 degree turn and connects to the right side. Theres a brush...
    Post by: maglite67, Oct 31, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  18. maglite67
    Post

    Harman Accentra Insert

    I work for the largest pellet stove retailer in the country as a service tech and stop on in from time to time to give advice. Alot of times you...
    Post by: maglite67, Oct 31, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  19. maglite67
    Post

    Harman Accentra startup feed rate

    that diagram is for the latest part number control board and the startup for the revision E board is a bit different and steps the auger. The...
    Post by: maglite67, Oct 31, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
  20. maglite67
    Post

    Harman Accentra Insert

    when you push the brush in the left side there is a 90 degree turn then should push all the way to the handle. If you look in the right side with a...
    Post by: maglite67, Oct 31, 2011 in forum: The Pellet Mill - Pellet and Multifuel Stoves
Showing results 1 to 20 of 145 Next >
Search Again
Page 1 of 8