he is right you do not have to remove the f.p. but the installation for the blower will only take you minutes. but if you bouhgt a gfk 160 a in the...
that sounds like what we call d.v. pipe and yes there is an adapter through hht that can go from the old to the new , the pert # would be ad1 or...
we have been installing them like hot cakes , but some have issues and some work great . my main concern is the blower vibration there has to be...
jtp10181 is right we are not here to complain , but it is very frustrating .
usually the warranty is 1 yr.
i will be totally honest , they are nice units and yes they do have blowers you can have the fancy remote as well that controls the flame height ,...
well i have been on many forums and everybody is having big trouble , on the new intellifire systems. the fronts weigh to much and cause the inserts...
i 'm working on locating that conversion kit for you ,i will post back with answer.
now that i know the exact model,yes you will be very pleased with it.and yes you have an option of getting blowers or not ,they come with dual...
mabye i should clarify . when i meant a by bad design , i meant because on some of the escape models that are not inserts ,is there is too much...
yes leave a small opening at the top of your chimney for any smell to escape , and your stone will poss. stay warmer the more you use the log set....
if you go with anything such as a log set i would go with vent free , with a standing pilot and if you have the lock on your damper to hold it open...
if you have an escape 36 or 42 dv. that is built in and not an insert in an masonary opening,they do not come with nor can a blower be installed ,but...
it sounds as if your blowers need replacing,possibly the bearings in the blower are bad.
hello i have a customer that has a metal roof (standing seam ) and i am unable to locate a flashing for that application, does anyone have any...
no you should not put any insulation around the flue it is considered conbustable, but you should a hi temprature silicone around the flur where it...
i do apologize for intruding.
depending on make and model , it would be less than $425.00.
possibly sounds if there is not enough continuity in the valve and may need replaced.
to the gentalmen with the thermopile issue. remove all wires from the valve except the thermopile wires,then take a multimeter set on dc/mv put the...
Separate names with a comma.
