P&M looked to be the easiest of the OWB to clean/maintain. i think the boiler itself was in the ballpark of $12k. what is your heat load? for YOU,...
if i was to get a OWB it would be a P&M. they look to be the best built units. always wondered how that optimizer would do with storage. might be...
Vedolx 37, 46.5"
Simgle wall stove pipe 90* piece that comes with boiler is another 9.25"
The top of my insulated pipe is ~71" off floor.
Flushing did nothing for my tanks. Actually made it a pita to vacuum the now wet sludge out.
I put wye strainers on each line coming out of the tanks.
Your supplies and returns will be alright on opposite sides of tank. Mine are Ted in and...
Yes, do that. Why not have supply right in the top?
There yah go maple, you might have another natural brother.
Regarding height you are supposed to have 18" above the boiler to combustibles. You can...
I love convert stories
reading and reading and searching and reading more. it aint tht bad once you dissect it all and work on one thing at a time.
regarding drilling holes in stainless:
if your hole is big enough to warrant a hole saw, you can pack crushed ice into the hole saw to keep it cool...
i am not arguing for or against storage. and i agree with what you are saying. i think that with the potential heat load for the two buildings in...
make some room if you can and put everything in the block building. insulation of tanks/plumbing/fittings wont be critical as any heat loss will be...
What is the function of the block building? If shop/garage i would strongly consider placing boiler and storage there. 1000 gal minimum storage as...
From top and bottom
Good on yah!
fiskars and a tire. 1 hour. done except for the two or three crotches towards the front of the pile.
its CR something or another stainless made in china. i looked it up when i first got mine and was able to make out the designation and lot number...
looks to be so. and i am careful not to drop any splits in or cram it tight when filling the firebox. very hostile indeed!
Well ill be gosh darned. I got a fracture that runs from the nozzle to just about the front of the ceramic. Guess thats inevitable.
The little weber...
Hey ram this is the BOILER room!
That is a little disconcerting to hear rob. This will be my first winter with mine but would hope to get longer than even clarkburg is reporting for...
What owb is pressurized?
Without more info can only speculate too long of a run for 1" line on boiler to house loop whereas the 007s are for zones.
Gotta be faulty pumps then!
Seems to do alright. Flames look different depending on what its focusing on.
iphone4 Lol Setting? uhm, no flash I just tap the screen to take photo Haha
My heart goes out to those less fortunate.
That is a beautiful BI job!
Weld and be done
Separate names with a comma.