How long have you waited? My P-61 has fed pellets for over a half hour after turning it off when it was burning at a high temp.
This is what I was referring to when I cautioned about the "Recycled" label on the Northeast bags last year. Matt Bell, the owner of the company took...
Kinda what I had in mind. It's worked pretty well so far.
What exactly are we scraping?? The burn pot or heat exchanger? I scrape the burn pot several times a days (OCD) with the Harman tool with the stove...
I've been saying the same thing. That's why I bought the stove.
For $209 you can't go wrong.
I'm heading into my 5th year with my P-61. The only thing I've replaced was the igniter (under warranty) and door gasket this year.
Here we go again.:(
I wonder where you learned that?
I have an 80+ year old cape with 1000 sq. ft. on the main floor. A bunch of small rooms. I heat only with pellets, my furnace has been off for 2...
Yes, a bad seal will let air into the stove and disrupt the negative pressure. Lazy flame, black ash, incomplete burn, etc.
Whatever you do, don't buy a unit that's too small. You want some horsepower in reserve. If you buy a Harman, or any stove for that matter, you want...
Honey Brown is my favorite.
HD forgot to charge me the delivery charge.==c
Been there done that!
Remember that next time your eating lobster.:p
MWP or FSU at $192 and I'm happy. Got 3 tons at $192 delivered.:)
Geez, I kina thunk it was the other way around.
That's 'cause you have a Harman.
I learned a long time ago expect anything in Maine. As the saying goes, wait 5 minutes and the weather will change.
Do a lot of research. Don't make a choice strictly for $$$ that you're going to regret later. Maybe look at used? Or like movemaine said floor...
Maybe??? But Harman couldn't produce enough stove in I believe 2008, so I doubt it sat any longer than that. Did he say when he bought it new?
A lot of people really like the Presto Logs. Can't say the same for the GS, though.
Good point. I vacuum under mine every week in mid-winter.
Is your burn pot clean when you try to start it? If so, your stove will feed and feed for quite a while then pause. It should be lit before it...
I won't comment on your choices because the only ones I see in my area are the Cubex and Okies and I won't pay the money for them. . It would help if...
You can't adjust your air on a Harman. The stove is supposed to take care of that.
Mike, it helps to put your location in you avatar. Gives people an idea as to what pellets might be available in your area, etc.
Separate names with a comma.