The Ace in Central Square NY closed up, i wonder why
Great photos Jason, what camera did you use and also what program did you use to label the photos? Hope you find your jamming problem, got the same...
9 degrees right now in Cleveland NY, running Somersets. Going to be a nippy night
nice and toasty in here
It just occured to me that when i clean and vaccum in out i stick the vac nozzle up the chute to make sure the slot that the photo eye sees thru is...
My profile 20 does the same thing and i have had it for 7 years, i could'nt find any straight forward answer either. It goes in spurts, it hasn't...
Did you put screen inside of the duster or just put rods thru?
[ATTACH][ATTACH] I guessed i messed up
Heres my Anti oil...
Ill certainly take it off your hands, the best way to ship is double box. I have a RT909 that is real heavy also, do you have any reels?
I know we...
Was a Transportation Manager, now retired. Collecting Vintage Stereos is my vice.
i am south of you down in Central Square, i burnt Green Team out of massena last season and they were pretty good. If you can find the...
I have this model in my garage, with no OAK kit hooked. The hardware store where i got my venting said i don't need a oak kit as long as its not in...
It seems like you have no mechanical issues, I would say tear it down and CLEAN-CLEAN IT and then it should be good to go
sounds like you need more...
15 bags, the wife and her dachshunds are cold
Well like i said there is 2 passages one going left and one going right that gets plugged with fly ash and then it cuts down on your draft. Also...
Remember you have to remove both fans and of course the auger motor, also there is a small bar that rotates downward. It is loosened by...
Do you have a Ipad or Iphone with Facetalk? I can alk you thru the process
Your right Smokey,
the LBT helps but i found you have to get in there with a coat hanger, and a small vac
You have to tear it down past the draft plate in order to clean out the left shaft/right shaft
I have a Profile 20 that i have ran for about 4 yrs, my did the same thing. How far have you cleaned out in the back? There are two...
Another Great Idea!
Any chance of you sending me the plans or measurements of that separator.
Would really appreciate it
I think i may have posted this in the wrong area
I have a slight problem, recently relocated and somehow lost the rear panel off my stove. I have searched high and low and cant locate one.
I read your post about the P20 and i have never seen such an informative post, in my life. I enjoyed your narrative about the board, because...
I have a unique problem, my cleaner or scraper that clears my heat tubes is detached from the pull handle.
It is still on the scraper but it...
I have a 2002 profile 20 and my feed is on the bottom of the panel, behind a flip down door. Have you cleaned it i mean really cleaned (pulled the...
Did you find the problem yet?
Quick question anyone got a specific model thermostat for my stove?
Thx In Advance
Separate names with a comma.