2/3 load about 4 hours into it.
T-stat is all the way down.
39F outside..74 in the next room..house is pretty even.
Just thought I would share.
After further experiments with my BKK I have come to the conclusion that my stove will consume more wood with the fans on also.
Took me awhile to...
Also would you stay with the same secondary type stove if you bought again?
For some reason the gasket is gone on the right side(facing) of the by-pass.
Look at the temp diff from side to side.
Stove has been in low burn for...
C/S/S early this spring.
Seems fairly light.
Get great cat action from it.
Burns fairly long and somewhat hot.
I ended up with some willow that this one guy snuck into his face cords that he sold me.
Anyways I come home to a great coal bed of ash....
Maybe 10 -15 mins difference in pics.
About 15 hours into a burn...temps were steady since 5 tonight.
You can see the cat probe dropped way more...
Face cord just seems easier to me..lol.
I have seen 1/16th cord,1.62 cord and some other ones tonight...drives me nuts..lol.
Just playing around.
Stove was almost out so I threw on a few small-med splits and let her burn with some flame.
These pics are about 2 hours into...
Ok..stove delivered last Oct.
I think it was in Feb. when the paint started peeling just above the cat.
Dealer said cat stoves do that and to just...
I had some pine boards in my basement that had to be 20 years old,so I figured if I have not used them yet why not burn them.
Stove was out for the...
I was bored..lol..and I know my glass was dirty,to hot to clean and the Saints lost.
Just found out about them and know nothing about them.
Ran across a couple.
A stove with headers?
Found out how to get a nice light show with the stove.
I had a nice fire going at about 500 degrees f...maybe 2/3 full.
Good bed of coals under wood...
I posted in another thread how I needed to replace our 24 year old BK Classic awhile back.
Probably could have welded it up again and maybe a few new...
Well I have been burning a BK classic for 24 years.
Stove has had some welding done and it is finally getting beat inside the box.
So we went...
Separate names with a comma.