They will probably burn hot and feed real fast since there are so small.
Did you try the search function? There may be threads already that can give you an idea of what people think
Energex canadian are a blend.....the FSU are made by the same company...no idea if the FSU are a blend or not.
Doesn't really matter what they...
Its not the fact that theybare stored outside .....it is the way they are handled by the employees and customers that destroy the integrity of the...
Nice!!! Good to see you got the parts you needed.
Ps...the hopper lid should be closed
I am burning them also This year.....so far just as good as last
They are the best around IMHO
The GC 60 is the same as the Enviro M55.....It should be able to use virtually any pellet
You are using a thermostat set hi/lo and a feed setting of 4. This will compensate for "lesser" pellets since the thermostat will call for heat...
Yesterday you mentioned the hopper was empty at 9am....that means for the last probably 4 hours or so it was under feeding the Auger.....all the...
I don't think its the pellets....they may not ne the best but they are good enough with your size stove.
Your pellet usage seems about right...a bag and a half to two is what I use this time of year.
Was the hopper almost empty when you woke up? If so it may have been feeding the Auger incompletely
That stove should be able to heat that space no problem.....provided its not a barn.
Seems to me it was either stuck in low due to improper t-stat...
How is your insulation? Is the stat hooked up correctly? Was it calling for heat?
I read that sticky a while back.....good stuff.
So would it make sense to set your max feed rate as high as possible and still get that 1" of ash?...
When you set a max feed rate on a Harman does it go to that set rate when the esp calls for heat? I don't have a Harman but from reading this forum...
Happy Thanksgiving to you!
They were going for 699 and sold out in less than 20min......awesome deal for those that got it
This couldn't be further from the truth....the reviews for Champion generators are almost 100% positive
I have and they were very good
Yep sometimes stoves and certain pellets don't jive.....
Can you increase your air any?
Lol....someone woke up on the wrong side of the bed....
Harman's have their fair share of issues....do a search on this forum and I am sure you will...
Perhaps too much draft now and a lot of heat is being sent out the vent
If you at the doorway example they use they have the vent just above the door....and obey the clearances to the eaves and corner of the house
If you look at the drawing they shaded areas where it cannot be vented
48" beside or below
12" above (9" with oak)
I have read not to do this as well....I am pretty much making this up but the UPS should switch to battery given any large spike so the joules may...
Separate names with a comma.