Separate names with a comma.
Well, You could live in New York and pay BOTH the fees and taxes!!!
I would take the matter up with the installer first, If you get no where with them take it up with your lawyer.They should know the codes, If code...
Shop around and see if they will price match.
If this year is the same as the past two or three, there will be a "shortage" of pellets towards the end of the season.
The thing I like about Pellets is the heat is bought & paid for, No surprise in the mail after the tank was filled or the gas bill. I have just...
you could always ask Ron
You should most likely be looking at a small 2 handed saw for both control & her safety. As far as price goes usually the pro style one handed...
It looks to me like it may have been a truck PTO pump, I would guess around 15 GPM. Do yourself a favor and get a 2 stage splitter pump.
You are doing it wrong, that's what kids are for!!!;lol
I'm not saying that a heavier axle is all you need to increase GVW, all it will do is reduce the chances of a bent axle. In all reality 3500# is...
Heli coil will take care if it with no problem.
Since they are not using it to store your Propane, charge them for storing THEIR tank.
Is it the stud or the case that is striped? You should be able to either replace the stud or heli coil the case.
I don't think I have ever seen a Hydraulic pump shaft designed to for a side load. the only way I could think to do it would be to set it up with...
031s were as close to a bullet proof saw, one of the best saws Stihl ever made.
No one at the rental place has ever heard of an auger extension ??? We have 12, 24 & 36"
36" depth for electric?? last I knew direct burial for electric was 18". Do away with the problem and use conduit it will also solve the problem...
It will be like bench pressing 50lbs. for every hole, It's going to get old FAST.
I don't know if the pads would help or not. I would guess that the noise is created by vibration in the motor. I don't think pads would help...
Call a few rental houses in your area and see if they are selling any of their fleet, I bought a 6x10 Felling FT3 (3000#) for $400
Check with a few lumber yards in your area for kit prices on garages, pole barns & sheds. I agree that $5600 sounds high to me.
Do you have a death wish? You answered your own question with "the one the wife likes are $120 each".
If she ain't happy, no one's happy.
I would bet that the footer under the foundation blocks is broken. If that is a sump hole in the corner you may have had water undermine the...
Why not make a front mount hitch, you would not believe how much easier it is to move trailers.
It is possible that you caught something during a cut, If you catch it just right you hit one side of the chain but not the other. Usually until...
I Did see a Consumer's report on blowers today. They did like the Cub 3 stage, just not the price.
Keep a close eye on the Aluminum for cracks, I am not sure if it will hold up to the constant torque changes.
Check ironplanet.com, You never know what they may have up for auction.
I think I would pick up a used one to get you through the year and trade it in next year.