Hey there, good to hear from you. Been busy as heck here just noticed you posted.
Again, I must say my calculations are estimates as I have no...
Just my two cents:
I live in North Pole, Alaska
I have owned and operated the Effecta 60KW with pellet option for 1 1/2 winter now.
The pellet burner will keep up to -20 or so, if it is going to stay around -20 or colder for more than a couple days I make the switch to wood and...
[ATTACH] OWB, before I got smarter, 70 plus cord/year. 11000 sq ft between 4 buildings. This one has been gone since spring 2012
Effecta 60kw with pellet option 30kw
Been running pellets all winter, works great. At -40 plus for more than two days i have learned to switch to...
Guys, been busy, up and running, pics to come
I am very happyyyyyyyy
Sorry I haven't been here sooner, it has been a crazy last 6 months.
I have the Effecta 60kw with the optional aero pellet gun that is...
I have my Effecta up and running, it does both wood and pellets.
I am thuroughly impressed so far. I have been running pellets for hot water and...
Ran small fires all week. Spent saturday charge all 1300 gallons, very impressed with the little amount of fuel required to do this. After running an...
I thought about raising it and there was alot of circumstances leading up to not doing it. I would have been happier but it will work, i may lift it...
The area the system sits in is the front of my Garage. I have an over size garage here, in Alaska it is a great asset. I could park my F250, 4 door,...
Thanks guys, Well tanks are full have cirulated for hours and purged the air that I can.
It was late and duty called (wife) last night so we did...
Gasifier, thanks much
That looks much better.
I am trying to get this phone figured out.
I guess i should post from my laptop so i can adjust pics...
I hope this weekend is the magic weekend and i can start a fire
Time out for some fun
Back at it, moving slow and careful
Getting real close, electrician will be over saturday
Pump goes here and about 10 feet of copper to manifold
Expansion Tank location, this was an earlier pic, they are plumbed at...
Soory, let me try again. Important I am not! Well maybe to the wife, atleast I hope so. Lol
Only 10 feet of pipe left and i start wiring and controls
Expansion tanks have arrived, the weekend has defined its self.
I will be busy finishing up and hopefully get things going this next weekend.
Well finalized last of the soldering and pipe work. Now i just wait for the expansion tanks, the sailed on the 30th.
I will be doing the wiring and...
Doesnt everyone enjoy her pics?
Well, things have been a bit busy here lately. I have made soem progress but things are moving slow. No big hurry since I am waiting on the expansion...
OOPS! Sorry guys, I will straighten up pics next time.
Didn't realize these were turned.
Still soldering pipe a little every night afterwork....
Let the soldering begin
The element is suppose to get it to 1200 or so degrees before the control board allows the damper on the OWB to open. In my father in laws case he is...
Here is a picture of the inside of the catalyst from clear stak that we removed from my father in laws stove last weekend. It plugged and would not...
Well, I have made a little progress yesterday and wanted to share,
Got the 250 Gallon tank plumbed and connected to the 2- 500 gallon...
Thanks much, I did the sudsy part and it proved to be a 4 hour journey getting the unions between the tanks secure, all seems good now. I have not...
Press test of tanks, should I go closer to 30psi as the pop-off is rated?
Days not complete without a little helper...
Separate names with a comma.