p61 combustion blower how to change? My just stating making noise..
What i do is turn my house bolier right off.What i would like to do is
just run the circulator on a couple times per day without the bolier being on.
I have a pellet stove up stairs im want to find out how to turn my circulator on for my boiler downstairs so it doesn't freeze.
Well I cleaned out where all the small fines are and still make the squealing noise...
Maybe next I will take off the motor this weekend and check...
No it is at leat 7 years old
"fines collection area in the back?"
Where would the fines collection be? Or how to clean it?
P61a makes a noise when the auger turns. :-) It High pitch noise any idears?
P61 what do you have your stove temps setting on?
And when you go from tempeture setting to stove temp does the fan come on right away?
All you need is a programable themostat set it to come on in the middle of the every night for ten minutes at 80 degrees...
simple ...Your pellets...
I have the same stove when it starts up it will fill the inside of the stove with smoke.And when my stove was new i had to seal the inside pipe with...
I had the same issue and was on another forumn and there is a guy who know harmans so i pose the question to him
you can go there and read and look...
Tks i will check in the am and call if i have too...
Have a good day off..
Thanks for the quick reply
She is at work now what she told me was that the lights on the side were on but nothing work..
I will hear from her...
My sister pellet stove quick after a power surge any tip before i go to her house...
Just wondering what every has for settings and how much heat they are putting out..
I have my p61a feed set on 3.5 and and temp on 72 and when it...
Go this forum and post in the Harman section and ask for Charlie...for help
Go here how to wire in a Harmen Pellet stove for a thermostat...
Not sure about your stove but my sister stove needed a blower for the combustion chamber same problem..
That what my wife says (need two more inches) lol lol lol
What gets me about oil prices is that in Maine its 3.449 per gallon and in New Hampshire its 4.59 i don't get it...
I would buy the Harman thr the wall kit....or direct vent only one hole in the wall...
So if your pellet stove is at the other end of the house you will have a cold draft from one end of the house to the other...
If you don't have a outside air kit what will happen it will
draw air in from every crack in the house and you will have a cold draft...
Just was wondering anyone had luck buying wood pellets around the Laconia area..
You could also go to this forumn and post it on Harman stoves and ask for help from Charlie help
Look at page 12 in your owners manual page 13
I think the owners manual say 3"...all the way
Is that 3 inch pipe or 4 inch???? It should be 3 inch
How much is it going to sell for?
Just brought some Quailty pellets was wondering how you like them???Paid 200 per ton or if you buy 8 ton you can buy them for 180.
Separate names with a comma.