It is highly doubtful the PE will heat you out of the house, unless you have it in a confined area.
Does the great room have vaulted ceiling?
Can you post some pics of those shoots? I have a similar thing going on here.
If the mortar is solid and sound, I would go into the mortar.
Should be plenty strong enough to hold the shield.
Mortar can always be filled in if...
I have an old Gilson with 30" cut you're welcome to have for free if you want to come pick it up.
It has a tire that has a slow leak( I would just...
My 361 does this occasionally when the chain gets loose and needs adjustment.
After adjustment, all is well.
Got some Husq's at TSC, work just fine, not too pricey.
Cut & stuff drop ceiling tiles up in the cavity. Back in the day, we used thick sound deadening cork board.
I picked 3 deer ticks off me 3 separate days of splitting wood in a fairly open area.
Luckily, caught each one while they were crawling up my pant...
You can always box two studs together for added strength, but may not be necessary.
I have used them here in my addition, and as the others have...
I went from Goodyear Wranglers, which I was never fond of, to a set of General Grabbers HTS highway all season tires.
Was looking at the Michelin LTX...
Maybe it was designed to "Yo-yo" to give that flickering, fireplace fire effect.
Why not put T&G plywood over top of the existing? Or just patch in where the wood is bad and then plywood over that.
No sense making more work than...
Definitely split that soft wood thick. Small pcs of that loaded in will make for a fireball of nuclear proportions.
You may want to think about...
Yeap, Seen that alot.
A little spit on a finger and work it both ways, and what a difference.
A bead of caulk pumped on and left, is just that.
I'd try pressure washing with water to start.
My Prestige calls for 10W 30 Premium Engine oil for the trans.
Looks like it had a bit of a leak also.
Its a cool stove, but those hinges............ Ugh
I just put the AC unit in the window. Sleep Summit, sleep......
If he used a 5" to 8" adapter, that is a fairly wide spread of difference in volume change, and would not float in my house.
If that adapter is not...
There are different sheens of sealer.
Get a low or no gloss one, and it will work fine.
Are you sure they aren't clover mites?
Google it for some info and remedies.
No sense in it.
Too many know it alls giving their input when maybe they shouldn't.
No time for that, going for a ride, F it.
First hand account of smaller sizing pulling a stronger draft.
That comment makes no GD sense.
There are many sized stoves with many sized doors, but mainly run on 6 or 8 inch flues.
Most stoves are burnt with...
A smaller diameter liner is going to pull a stronger draft.
You can always slide an extension strip of flat metal under the existing drip edge and have it overlap over the back edge of the gutter and, tack in...
Not sure what the hell that pipe is connecting to? Radiation shield? The materials around where the piping goes through the ceiling of the alcove...
That looks like Kemlite, which is fiberglass based.
Similar material as the inside lining of reefer trailers.
There is a stress going on that is...
100 MPH tape is nothing more than a good duct tape, and not a perm fix.
Separate names with a comma.