I bought it online from http://www.woodmanspartsplus.com/ had best price.
It came with a wiring harness and new PCB.
A steel template to drill the...
You should really start a new thread so that more people will see it.
This one is a resolved issue and may be ignored by more.
We do also need more...
However I know Ive paid as low as 235 a ton...with 50 dollar shipping .
I get mine from www.woodpellets.com
They usually have a spring sale.
If I were to use a light...I'd see how dirty it is in the stove and I don't want to see that!
I dont have a Quadrafire but I would think this is part of the thermostat it self and you may need to turn it off.
Of course..I'm not familiar with...
Maybe he would be interested in making another for a few bucks?
No draft meter.
When I was using the Old Control board I had never gone over more then about 2/3's of max feed rate...that worked fine in -10 degree we had a few...
I've had my p38 for about 5 years...and just replaced/ upgraded the Control Board.
Was a fairly simple install and its been working nicely except it...
what kind of exhaust setup do you have...
Maybe rain in there has caused it with the large amount of fly ash that sticks to the Exhaust pipes.
They are worth the price..but you will have to wait..they are presently out of stock again...sign up for email notification.
The price went up.
Now its 7.
They had a $10 off sale.
Do you clean the glass also?==c
I love mine!
Fill the burn pot with 2 or 3 handful of pellets.
Then It depends on what you have on hand for lighting.
do you have any hand sanitizer? or alcohol...
one of the best Cleaners is ash...dip your newspaper in the ash and clean...ash cuts right thru it.
A little rust shouldn't be a big deal..nothing some steel wool and Black Paint can't fix.
More importantly is do all the motors run (quietly) or not...
$450 sounds cheap..its it working completely?
I believe it could be a dirty or bad ESP also.
there is a 10Ft available for 30 bucks..from home depot or Amazon.com
Thanks for this thread.
I like the room temp mode and have dug out my 3301P and am looking for some thermastat wiring to wire it up.
I like the...
I dont know..but I wouldn't think it much of an issue..the weight bearing portion of the stove centered under the hopper..so I dont think it would...
Thats what I'll do ...move lid to extension.
Im in the process of seeing how much the steel Ill need.
Im going to use 20 Gauge steel and my brother's...
no calipers..but maybe I can a paper tracing and measure that
$160 is more reasonable.
I haven't checked at any local dealers...Ill have to do that before I buy steel to make my own..
Does anyone know What gauge steel is used for a harman hopper extension?
Im not finding any one with one on craigslist..only ad I found goes...
Check the Bill.
A bunch of suckers we are.
They are worth waiting to come back into stock.
Only down side of them is the 4 ft hose is a bit short..but love it...
My Harman bottom feeder has the tink-tink-tink sound of pellets dropping ..which is pleasing. :)
Separate names with a comma.