90 bucks for a half or 175 for a full. I use a 32 hp mill. Moisture content is 13% during production. They are bagged in 40 lbs bags.
Nice score! I was at that store Tuesday I guess I should have looked harder!
Where did you find these?
TSC in nazerath has cheat river but should have green teams next week.
I ended up buying cheat river, they burn ok and keeps us warm. I guess that...
Have been burning Green Teams and the burned great, but the only pellets currently available in the immediate area is cheat river and stove chow....
Assuming they are the same price, I would go with the presto logs.
I have burned Great American pellets and liked them. They are made about 15 minutes from home but I have not seen them for 189/ton
Has anybody ever heard of timber heat pellets? Are they any good?
Upper 20s overnite, but inside temps are 70 downstairs and 68 upstairs.
found some cheat river pellets @ Lowes for $3.94/bag. Are these worth buying or are there better deals to be found?
Stove is running GREAT in mode C!! Thank you for validating the settings.
I even got the T-stat working today.
read a post on the forum, same stove set to mode C. Trying that setting now so far seems better but with probally need to contact tech support. Seems...
I should also add this stove was installed 2 weeks ago. The manufactor date is 5/11
Had a power outage and ever since the stove has low flame and low heat output. Anybody know what mode this stove should be in? It currently is set to...
Got 4 bags of Stove Chow at HD today. 2 hours in they are burning great with good heat output.
Price is $210 per ton, is a good price or just average?
When is the best time to purchase pellets? When are the best deals?
Any idea what the feed rate is on Summers Heat 55-SHP22 model? How long should a...
what is the benefit\advantage of installing a Tstat on your pellet stove?
Will it reduce the amount of pellets burned?
ESP part# D5130NT
Was burning at a setting of 2-3. If it gets cold I will use a higher setting and maybe get a little less ash.
The bottom settings are factory 6-4-1
Pellet stove newbie here.
Just did my first overnite burn, about 9 hours burn time.
Does the ash look normal? Is my stove burning properly? Currently...
When I start the unit should I use a higher setting of say 5 or 6 then back it down to 2 or 3.
Reset back to factory settings 6 4 1 running on 3-3 for the last hour.
I dropped the airflow because the vent was so hot it burnt my hand when I touched it, and the vent air was hotter then air coming out of the...
Don bottom settings are now 5 1 1
currently 142 on the thermo
heat setting of 2 and blower at 5
New to pellet stoves and hearth.com.
Just installed a Summers Heat 55-SHP22 stove. Everything appears to be working, got what I would consider a nice...
Separate names with a comma.