I very much agree.
Yeah it was mighty cold here the past couple days. I had to load my boiler at least once every 24 hours since it got cold. Takes up a lot of my time!
I'd say you have a combustion air problem. There is a lot of heat fuel left after the wood is reduced to charcoal. Check your draft induction system...
27% and too dry.
You should have been a writer!! Glad everything is ok now.
BUWAHAHAHAHA.......................I thought the thread was titled Best small wood insects!! LOL
As soon as you get into some Beech, Hackberry, or crooked Maple you'll understand why an axe doesn't always work.
I agree with the don't put the HX upstream of the blower thing, but it isn't a problem to put the HX upstream of the evaporator. Normal head pressure...
I would try to find one that's at least 8 HP, has a two stage pump, and has vertical capabilities.
Agreed, household bleach won't hurt a thing.
Could have a crank seal leaking too.
Yeah....................I remember when I had my first beer, made me say silly things too. What do you have against steel roofing? Have you checked...
No, I don't cut professionally, I just cut for myself and a couple other people and sell a few cords for a little extra. And I wasn't "snubbing my...
I installed a ProRib steel roof on my house this year. It is 16" wide pieces and it interlocks together meaning that you screw the first piece down...
I agree that making a couple passes on something that exceeds the bar length isn't an impossibility, but I have a bigger saw, and it's easy to grab...
I regularly get maples that make my 3120 real handy. I have two logs now that both exceed 50".
I just pile up the odds along with the 12" thick cookies that I cut up into blocks when they are to big to wrestle into the splitter, and into the...
They are ok for occasional home owner use and a little wood cutting a couple times a year. But as was posted earlier, they are not a pro saw.
Cottonwood vote here too.
I have about a cord of Hackberry and most of it is dead and a bit punky, but it burns ok.
Looks like Catalpa.
I appreciate the input everyone, it's still running almost silent at the same temp, so I guess I'll just see what it does and go from there.
Congrats! Welcome to the world of fun heat.
THAT'S FUNNY RIGHT THERE!!
It is what it is I guess, long as I'm not the only one I'm ok! LOL
Is the airflow across the evaporator and condenser restricted by a dirty screen or filter?
Lust checked the temps, indicated in water side is 185. Actual via Raytek, 184 at pump volute and 208 at the motor housing. Whaddaya think?
nope no airlock, heats just fine. So you are saying it ain't normal to run this hot?
Reread my post, the water was only about 100 degrees when I noticed it. The water is circulating just fine with NO air, it's just the temp of the...
Separate names with a comma.