was out there today to check on her and the damper was open and it
sounded like there was a fan running. even after the damper closed i
can hear it...
i can get thin firebrick. is there a benefit to lining the bottom with brick?
not sure but i checked it and its 100% level
ever have the need to clean insulated chimney's section's
i was riding in pa. last week and seen a owb on line,. it was a hot day. must have been heating his domestic hot water. i was thinking about getting...
i am able to get some 2'' thick fire brick. do you feel that i would benefit by installing it on the floor of the burner?
what do you guys do to summerize your central boiler
i only needed 5' of pex. my dealer is about 150 miles away round trip. that white pex is the same as the green pex the dealer installed.
if i went...
e bay sells those used bits cheep. i think mine is 5'' to get the 4'' thormo pex in.
picture of valve tag refference sheet
i am going to try to keep my central boiler running all summer to heat my domestic hot water. i by passed my heat exchanger and now the central...
central boiler has green poly pex pipe with a thick wall that they used to run in my basement. i need to make up a by pass line with pex and i cant...
i think this iw what u are talking about.
i think i got it.
cut the IN water line and the OUT water line on the hot water heater (green pex) put tee's in each cut with valves and thats it...
with the day temps. getting into the 70's and nights little cool i was
thinking about killing the power to the central boiler during the day
I LOOSE ELECTRIC from time to time. i installed my central boiler at the end of February,at that time the temps. here in n.j. where not that cold so...
thanks bart for posting the link,
anybody ever bought this one off e bay?
with my CB 6048 on line since the end of February ,i went thou less then a 1/2 truck full.
i uset thermo pex at 10.95 per ft..
what do you have now?
with the outside temp in the high of 40's and the night temp in the low to mid 30's. i lowered my Set point from 170 to 160 to conserve Wood. did i...
what a night! i am a new owner and with little experience with my 6048.
after loading it today to the max i wonted to see how it was doing. after...
i am done stacking. i stacked for years and it was a waste to me.
i just installes a owb and my splitting might be overwith also.
here is a pic....
any pro's and con's?
i can get a few cords today. what are the con's?
pdboilermaker, great reply.
i think it was wet wood.
oven cleaner it is..
i used simple green and it wont cut it. what can i use?
Separate names with a comma.