Sportsman's Guide has the Swisher 12 ton splitter for $499.00 plus shipping....
I cut mine on the Englander 13 nci.
I will clean the saw up and try the grease.
I did not see any high spots on the filter but I will look closer.
I have been cutting black...
Updated with picture.
This is about a half tank of fuel used.
The upper left corner looks to be the area that is leaking.
Have any of you Guys or Gals had any problems with dust getting into the carb./eng. on the Husky 450?
I have had the saw since new 1-13-10.
I will check them out.
I was looking to make some panels.
Has anyone done this?
I have the 13nci also. The first blower lasted for 3 mo. The replacement blower did what yours is doing the squirrel cage is sliding down the shaft...
I have the little nci 13 inset and it heats great.
I do have 23 ft of insulated flex liner installed have no problems with draft.
It however will...
I think you are talking about the resent post were you put your hot coals in the center North South.
Then put two splits NS either side of the coals...
Fix the door gasket.
Then maybe you will heat up more.
I had a home made blower before the englander 13nci blower and the nci blower is better.
We can run it on high and only have to turn the tv up...
:-) Glad you are getting better temps.
That avatar picture is were I did have it.
That location is no good.
Moved to the right side just about...
I have the 13 nci.
I have good wood mostly elm and hack berry.
I have the block off plate, 23ft long 6in flex insulated liner and insulation on...
I hope this is ok.
I don't have my bailey's catalog with the discount code any longer.
Does any one have one that has a code that...
I had the same problem.
Two things caused mine.
Not fully seasoned black locust and not adjusting the air open more and more as the wood burned...
I think it is great to teach them responsibility.
However, the dad in me would be very concerned that something would go wrong.
Just today I had a...
I would still make a block off plate as the surround will not stop the chimney effect.
Glad you found out it was the wood. Make your splits smaller...
Don't forget all the extra body heat.
Have a great party and Merry Christmas.
Nothing like a fire ball for breakfast.
Glad no one was hurt.
I have the 13 NCI and it needs R 2.00+ under the insert. I have the insert in the fireplace on the fire brick above the hearth. That is one of...
I would like to know if their is anything that I can do to get the wood at the back of the insert ( englander 13 nci) to burn up.
I would fill the cracks with the hydraulic cement and then find a faux stone and mortar it over the chimney.
I have an insert.
The temp is taken on the side of the insert above the fire brick but below the secondary air channels on my Englander 13nci. I...
Grinder is what I used.
Is your fire box masonry?
I have the Englander 13 nci.
The Locust splits easy compared to Elm. This was well cured some on the fire right now.
Helps to have the splitter (see signature).
This is the...
Me and a buddy were going to cut some hack berry on a farm today.
But we got there and the gate was locked.
Well we thought that was the end of...
For you insert burner I just found that the frame of the door is not the best place for the thermometer to be placed.
I moved the thermometer to the...
Separate names with a comma.