You could use the 400 gal. Tank as a buffer tank . If you stil want the capacity
Most put the boiler circ. pump on the inlet side of the boiler after the boiler protection as far as I know .
Here is a good link:...
I used high density foam board 2" thick , then poured over top of it. I'm pretty sure I researched it first but its been five years ago now.
I hope you insulated your pipe good or you'll be digging it all back up.
The tank behind the boiler is my hydraulic separator or buffer tank. It's 150 gals. All my loads draw from there.[IMG].
I then filled all that space in side the framing with fiberglass insulation.
closed cell foam work[IMG]s excellent[IMG][IMG]
I have a Vesta, I could do a lot of satisfying things if I ever ended up in that situation. lol. Allen that story doesn't always hold true , my...
Yes I am also very happy with the two of mine 5 months no wood consumption by the time Oct comes around. Thank you Tom for the friendly service and...
Hey Tom , what do you do with the nyle's after they are put out of service for the winter heating season? I assume you shut the supply and...
After you add the 950sq feet and allow for the increase in cost of energy for the next 5 yrs, I don't think it will take too long to break even......
Alder and Poplar definitely have less BTU's per cord than say Fir,Hemlock,Maple or Birch... But it is not useless if dry.. you can still heat...
Sorry Maple I made a mistake ... I bought $24 worth , I needed a few for some other project.. They are $2.99 a piece at Home Depot here .
$25- fittings and pex
$6- 2 cinder blocks
X2 because I have two of the units.. I have been filling a 10ltr. bucket with condensate...
funny one unit seems to make a fair bit of condensate and the other doesn't make any .
I haven't needed mine either , for the time it takes and the cost it could save you some time and money one day..:)
If your not using antifreeze , it might be a good idea to wire in one for those wall mount heaters with the fan in it , into the space..
[IMG]f[IMG]Got the second DHW Heat Pump running .... No burnibg any more wood till Oct.:)
There isn't a real convenient spot for an aquastat. just thought it might work ,would make installation a lot simpler.
I would like to use this relay to control dhw temp from the nyle heat pump. I know this might be a dumb question. The four terminals on the...
Ya I know, it was just some left over I had laying around
The drain is the cold water in dip tube .. you have to syphon the tank out .. I will use the aux tapping to connect my HP outlet to.
Took 5 hours from a cold tank of 52 gallons to 129::F
Ya I used hepex tubing Clarkbug.. Its the stuff that won't allow oxygen to impregnate through.
Don, there are three wires coming out of the Nyle that were prewired by Tom in Maine . Yellow ,Blue,and Green. The green is not used . the yellow...
ya all was good , thanx Tom.
All connected and running since 4 pst
[IMG]. The trappings on the top of tank
there is an aux. tapping. it just has a gauge threaded into it .
Separate names with a comma.