Merry Christmas, begreen,dakota dad,thanks for your inputs![ATTACH]
Used a Selkirk outside support plate which is what the tee is sitting on. Frame is 1 1/2" ,1/8" angle. 1/2" ready rod. Painted every thing...
Well folks she's done for Christmas. Will post a picture of the bottom support for the pipe in the morning.
Don't know him,will check for his rig. Seemed the best way. Live in NW Indiana. Quite abit of logging here ,mostly white , red oak. Need to finish...
Thanks guys,this is a great site. Good people.
Have searched the internet and can't find a manual. Was my uncles saw. Had it running 20 yrs ago. Need parts and manual. Any idea were I could get...
15-16 cords on her early spring 2012. Wanted to make a lifter for the splitter,just never had the time. Some day.
You know Dave think its from the ash box, witch is nice. Thinking of putting some 2" mineral wool ins. in the box. What you think?
Thanks Begreen, 14-15 cords of white oak sittin in the sun on the south side of my woods on pallets,slpit small. Not doing us any good till we get...
The romex is from the old fireplace blower control. Thinking of useing it for lights in the or above the mantel.
Its not setying inside ,the back of the stove will be flush with the drywall. Was hoping to use a roof support on old firestop and roof.
This is a...
Sorry ,got them dumped to L.T. Thanks again for all your inputs.[ATTACH][ATTACH]
Stove will set flush with drywall. Heat shield sets 2" inside of that plane. 2x6 wallstuds 9 1/2" away from side heat shield. Studs overlayed with...
The tec. Data says not to exceed 85 f / 70% h. ? Not being a pain,but won't the hearth get hotter then that ?
1 - 1/2 on the first,will be one more on the second,then 3/4 " granite on that.
OSB were. Floors OSB. One more steel stud floor and another layer of nextgen to go. R-11 insulation .
Check out my installation;)
Well , getting there. See any problems ?[ATTACH] [ATTACH]
Good to know,thanks. That's the route to go then
The problem here is metal studs can transfer heat. Received the mineral wool insulation from M-C. It will compress so I don't think it will hold up...
Well at this point must do what ever it takes. Thanks for all the pic's. So saw the steel studs but what mat. did you use to get to 6.6?
Ya just what does ZC mean ? It's not zero clearance.
Thanks for the reply begreen,
Ya thats with the 6" legs. My opening was 42 1/4" now is 31 3/4". 6.6 is just a crazy number for...
Hello,very good site you all have here. Wishing now I'd have done research here, ARRRG. Had a junk tempco here when we bought the home.It's in the...
Separate names with a comma.