Ed Reynolds Turner 207 240 1407
Two extrol 110s will do it. I have one 160 and it works also but it is border line.
You want a fluid power energy brand. www.fpevalves.com
if you have more draft than the boiler spec calls for, then yes it would be a good choice.
Did you ask the person you bought it from, what the problem might be? Why did they sell it?
I was thinking, if the tool is 3 feet long. A flexible boiler brush on a cordless should work? That is how I do mine. I clean every three to four...
Can you vote twice.
With the Vigas shut down temp set at 255 you will have charcoal left from the previous fire. Rake the coals over the nozzle add a little kindling,...
I use that on my wood boiler smoke pipe. Works fine.
Every one around here is $210.00 to $250.00
I think you need some insulation.
I have done the pallets. They don't seem to hold up well. I paid $20.00 a piece for the cages.
Phil, how long are yours.
The splits are 18 inches. I cut the end out and just left the top bar in place. With the size wood I have it = 35 cubic feet each.
I found some tote cages for storage.They hold a little less than 1/3 cord.
Call Ted Kestor 613 349 9267 Vigas Dealer
Go with the 40kw.
All I know is the importer is a couple of towns away from me.
Why don't the IFCs work well?
If that thermic valve is the same as I use then it should be plumbed like this.
Port A is return to boiler.
Port B is the bypass leg ..
1.25 is good for a 40 kW boiler.
I looked at the drawing. If you are using 1.25 pipe from the boiler to the tank, it is to small. You need to move 30 plus gallons a minute for that...
What size pipe did you use from the boiler to the tank?
I can get 5 to 6 hours on a full load of wood ,burning to storage. Then I get an other 5 to 6 hours from the tank depending on the outside temps.
More storage = how many hours before refilling the fire box. twice a day seems to be the norm for most. Then you will need to know your heat load as...
Only one dud, that is good. I just watch the smoke gas temp.If it is climbing at a steady rate I can walk away with out the fear of the boiler not...
That is the one I use. You will want to set the tank cut out temp where the output is not produce enough heat to satisfy the heat load.
How big of a boiler are you looking for? Vigas has one that will 341,000 btus an hour.
The ranco two stage is a nice unit to control the oil boiler and the circulator between the tank and the house system.
There is a Vigas dealer in Brockville. Ted Kestor
Separate names with a comma.