the o's are alot like the somersets.
An excellent pellet.
I would have no problem burning them exclusively.
my thoughts exactly
yeah it can go faster with a freq drive.
Well put BJN.
I can tell u r a very honest person.
Your explanations were clear and concise.
Lest another spin from the spin Doctor.
very well put without all the BS.
It's refreshing to see someone that understands the simple dynamics of heating.
more fuel=more heat
less fuel=less heat
A good reminder that a smoke/carbon monoxide detector is needed in each room where the stove is.
I would say 2.5 tons by FEB is normal to below normal.
If u guys get weather like we do in the midwest.
I didn't keep count but I would say we are in...
what a lie "So your saying every pellet has the same BTU value" told by some 1 who said “I am in no way biased in anything I said! “
rockfordchimney.com are good people.
I been told to "don’t use it or play attention to it" (meaning the thread) by a party who has admitted that they have monetary interest...
If u don't like my opinions then don't pay attention either and
your average joe theory doesn't hold water b cause the average joe is heating with...
Let me put it in layman's terms 4 u.
Without regards to the material being bamboo or pipe tobacco:
plain and simple. More Fuel=More heat....
plain and simple. More Fuel=More heat.
Less Fuel= Less heat.
Pellet size has to be accounted for.
U will want to try a few bags first.
Hate to have someone get SCAMMED
stove or vent or combined.
The type of pellet is the biggest culprit.
u probably can try a little acetone or finger nail polish remover.
The sticky stuff is creosote.
One time my stove shut down on over-temp.
It was b cause I had the combustion air shut off and I had it all over the...
I guess a little bit wont hurt.
Just get as much off as u can.
With that said when I replaced my door gasket I sandblasted the groove and removed all...
is it magical or magically delicious?
here ya go al.
I have the osburn 35 made by SBI.
The same company as the Drolet.
Your 45 should have came with 2 gaskets for the access panel to combustion fan....
hold on there pb and cn.
I elected 2nd day air as a option. I could of had it the next day if I chose to overnite it.
That is all. Have a good...
I cracked the glass on my pellet insert while replacing the glass gasket.
No brain-er, onedayglass.com had new piece in 2 days.
5 degrees this morning osburn 35 at heat level 4 of 6
burning the pennywise's . upper level at 76.
Being the weekend will start the osburn 35 in the...
just use a 2 dollar propane torch. I just replaced mine after 3 years.
Also I saving the igniter because it turns off sooner as the convection fans...
ur problem is very easy to remedy.
Separate names with a comma.