Seems like you did the right thing..... stayed with an 18" bar and got some RSC chain. That's what I run on my 346.
I'm lucky to have a ton of...
Appears it is!....... and it's cleaner than my living room carpet :eek:
I already did...... no response as of yet
What a frickin' bargain when compared to the comparable stihls
Here's mine, it's a 2000 model, has been ported with about 185 lbs of compression
here you go
The 170 is a decent little saw. I own one. Really depends on what size wood you are cutting. If you do get it, see if your dealer will set it up...
In all seriousness, I would go check this one out....... it's a 290/310/390 (definitely not a 350 as listed....
You're in luck! I found you this lol
Do you need something immediately? Good deals come up on arboristsite quite often from reputable sellers. I can keep an eye out for you if you let...
I need to get something like that. I have an old aluminum ladder laying around hmmm (redneck engineering wheels turning)
I have a 15 ton speeco that is seldom stopped. Very easy to maneuver around the yard by hand and fits in a smaller space in the garage.
If I have a...
I am not familiar with that muffler, but you may be a able to pry up the deflector with a screwdriver and then sneak in with a dremel bit and open...
Is that muffler silver like the 455 rancher? If so does the exhaust exit from the top of the muffler?
The worst offender I have ever witnessed was a 660. So much trying to escape the little exit hole.
The mod is the easy part. You must either have someone show you or learn from the innerwebs how to tune a saw. It will need adjusted after it is...
LOL, like a foreign language. I can't stand to hear a factory saw "whine" through the choked up exhaust.
Amazing some people have nothing better to do than sit in their parents basements and hack websites.
Appears AS has been hacked!
Yep, you are missing something. Should pop within 3-4 pulls and then fire on the first or second at the fast choke.
I can drop start my ported 372...
Those are nice little homeowner saws.... similar quality to a stihl 210.
That's how my 372 was done. It flows like crazy and is loud. Only real drawback is it will smoke the bark on long cuts.
post #15 has a picture...... http://www.arboristsite.com/chainsaw/132083.htm
No, the screw holds the screen. The deflector must be pryed up with a screwdriver. Then sneak in with a dremel and enlarge the factory outlet. Then...
I think the best way (how I did my 346) is to pry up the existing top deflector and sneak in there...
No, the 2153 is a 346 in red...... it was the fastest 50cc he had built.
Did it beat the current "king", the 2153 Jonsered?
I would have called the BBB and the State's Attorney General weeks ago. Not sure about PA law, but you had a nice consumer sales practices act...
I can't remember the brand?
He did use hardwood and not a Christmas tree :p
and I highly doubt A)
Separate names with a comma.