I made a table for mine out of recycled lumber.
TSC has it on sale $50.99 off.
I made an adjustable stroke limiter for my Huskee 22 ton
Southern Hackberry aka Sugarberry.
Top one looks a bit like Persimmon.
69217 IPL: http://www.barrettsmallengine.com/partslist/homelitesuper2ut10520a.pdf
My info is from the original manual dated 1977.
Displacement: 31.14 cc
gas cap: 70702-A
chain oil cap: 70701-A
Looks a little better than mine.
Had it a while.
When splitting wood or even working with my tractor and equipment I wear soccer shin guards.
5 bucks at wal mart.
The old farmer sez to get rid of a stump attach something useful to it (like an anvil or a vise), it'll rot out in no time.;)
[ATTACH] [ATTACH] [ATTACH]
The manual says not over 45 mph.
I towed mine about 8 miles home topping out at about a little over 40 mph.
I checked the hubs when I got home.
Thanks for the heads up.
I had been looking at the Huskee 22 ton and the free log catcher sealed the deal.
I only had a small stack of unsplit elm...
Task Force: from the bottom of the plug 10 3/8" to first mark 11 3/8" to second mark.
I also have a newer Speeco, it has a shorter rod.
A pair of $5 Wall Mart soccer-style shin guards has saved my legs from numerous wounds from flying firewood.
Neither the Speeco 5 ton nor the Task Force I had before work that way.
They both retract while the motor is running.
The Speeco has a push on push...
I think I will install an accessory outlet in my splitter control box.
Then I can use my electric chainsaw to trim the ones that are just...
Ice tongs are excellent for handling firewood.
I have several sizes that I use.
A little paraffin (candle wax) on the wedge will help. I have also used Pam spray.
Here is my solution to lifting heavy rounds. :)...
That's what I'm planing to do, just haven't found a roundtuit. ;)
For now I just set a pallet behind the splitter.
I built a table out of scrap lumber for my 5 ton splitter.
I hooked a bungee cord to the control lever so I could operate it with my...
The pipe is 3/4" ID the hose is about 1" ID.
I used pieces of washing machine drain hose for the grip on the ones I made out of 3/4" pipe and ice tongs.
The second shortest one is...
After watching the youtube video a couple times I decided to build one.
Although I have plenty of recycled lumber and several swivel bearings...
That model didn't have a flare at the top of the cone so I welded 4 pieces of leaf spring to it.
After that picture was taken I broke a couple of...
Separate names with a comma.