Mini is 2599 and the p3 I believe is 400 more as for differences I'll take some pictures and do a comparison in the a.m.
We installed around 20 with the same issue. Then the last few have all been fine. I was told that it was a change in suppliers of the magnet.. I have...
We have it burning in our shop. I really like it sofar
both responses are possible causesthe Empress does have a brass bushing at the top of the auger shaft that can wear out over timeI would also check...
This thread is going much differently than last year's
I have the info at my office I can scan a copy for you on Monday
But from memory unplug stove disconnect the leads to the exhaust temp sensor. Press...
No always test on high, don't turn it down to 3
Make sure to change the program on the new board to a 2 as it ships in program one will do weird things in an empress
It seems like this maybe the only option I find
I need a more consistent supply as we are a retail shop.
I was meaning for a pellet stove.
Anyone using a thermostat that allows you to access it via a mobile app?
Any news yet as to what happened
The service rail kit really helps as well
Just to be clear I fired it up out of curiosity after your post.
Now the shop is way to hot, but know I know
Nope I had it on Manuel at heat level 5. Many longer times than 30 min would produce different numbers, but not significantly
That's what I was referring to.
I do not own one but we heat out hearth shop with a m55 insert along with other pellet stoves. Message me so I don't forget, but I can send you the...
I measured the tem at the ash pan today on high for 30min. Got a 82. I've never seen it even get hot to the touch. The heat exchanger is a the top...
Can you post pictures? Would blue stone be an option? We just got a price for a piece nearly the same dimensions for 85.
Ember protection only is all that is required
I'm going yo get accused of being a cheerleader here, but the enviro m55 fits every thing you asked for.
But saint Croix makes a great stove as...
Install when great. Looks awake in the house. No word on burn yet as it is a second home we put it in.
Usually the units are run with a" whisper quiet" flex pipe. They are better suited for the stress of pulling the unit in and out for service
Seems odd it's not flex but yes it should be fine temp wise.
My maxx has been on the last 2 night's. On low with okie Douglas firs, a bit too warm for it but to cold not to, need to get some cheapies till it...
Should ad that this is an experiment so I can start setting up some of y these systems for customers once I understand it better
Once or twice a year, for 2 days at a time tho, big snowfalls around here
Separate names with a comma.