not sure where your getting your info from, but we have over 7500 ac,all with old growth trees.
and nothing around us will be ready to cut for 10...
I replaced a gas insert with a Kozi pellet 100 insert.
I have removed everything in side and am left with bare stud, and gas chimney liner,
I just went to lowes yesterday, to pick up some shelves I had bought online.
this was in Bullhead,Az (across from Laughlin,NV), this...
Thanks for the help.
we had visitors , so was busy entertaining,
sometimes the obvious ( on line manual) does not come to mind!
its out in the cold garage, and I'm in the warm house. LOL
The controller has a 2 wire connector for a remote (wired) T stat, I'll have to read to see what voltage it is,
is there a standard voltage for...
use a special T stat?
or can I use a std home type T stat?
( I have a Kozi 100 pellet stove)
also, does the T stat shut off the exh fan , when...
what do you align? or how?
fireplace was constructed as wood burning fire place,
just never burned wood.
not a zero clearance fireplace,
I had house built, and was owner...
OAK outlet on the stove is 1.5in,
fireplace is gas only, so no clean out.
in searching for tubing of 1.5 dia, nothing available,
so looks like...
of used Kozi 100.
insert, with exh going up chiminey, via 4in tubing.
can i run a pipe for outside air to stove, down the chiminey? ( 1 1/2 in dia)...
Thanks, I thought it might need the 4 in to draw properly.
we live at 3300 ft ele.
exh vent on back of stove is 3 in,
I have heard that I might need 4in to vent properly.
stove is Kozi 100 insert,
how do you tell the wattage?
or if its original?
thanks, I'll give it a try,
any idea what temp an ignitor should be?
used, about 5 yrs old.
cleaned and lubed everything, read everything I could.
here is the question, upon start up, everything progress fine,(fan...
Separate names with a comma.