I just had a local service take down 2 trees for me in meriden, CT One as big or bigger than yours and one smaller. Got it done for $550 and they...
The first thing I would check is to make sure the door gasket and the window gasket are making
good seals and not leaking by. Your door handle may...
Just wondering what everyone's experience has been with seasoning
time on 2"-3" oak branches has been. Being just a little anal about my
Congrats on the permit. I just found out I received one too. In the past
when i got a permit, I received a letter from the local forester stating a...
I'll second the split it right after its cut. I grabbed close to a cord summer before last
and split most within the first week. Didn't split...
I have the I2400. It heats my 1300 sq ft house pretty good.
I get about 8 hrs. out of a full overnight load. Usually the thermostatic
Wondering if anybody has any input on this
issue. My new to me husky 50 won't stay idleing
once it has warmed up. Cold it idles no problem, but...
Thanks for the heads-up. Grabbed one truck load.
Free wood is good wood
Top cover is gray/black.
The serial number is 5150486
Have an oppurtunity to grab a Husqvarna 50 in reasonably
good shape. Wondering what everybody thinks about this
saw. Any firsthand reviews would be...
Maybe a stupid question, but I was wondering if anybody could
give me a short education on the differences in chains(safety, semi-chisel etc.)...
Well if that is the case and they did change the design because
of issues with cracks there, then you might have it a little easier
dealing with the...
Looked at my i2400 just now because you guys got me concerned, and
I noticed that the area where your cracks are appearing don't seem the same
Just jumping in here to ask about the pallet company in CT.
Any contact info would be really appreciated.
My insert normally runs about 300-330 with the therm. on
the door. Have seen it as high as 525 for short periods.
Hey guys, I got a magnetic thermometer a few weeks ago and have been
monitioring my temps. I have a regency 2400 insert with the thermo on the...
Moderate temps today so i let the insert go cold.
Checked the chimney, and cleaned out the ashes.
Also did the dollar bill test, and ended taking one...
Just wondering how much creosote you guys let build up
before you sweep chimney. Just checked mine and had a
buildup about the thickness of a few...
Hello everybody, I was just wondering what kind of temps everybody
was getting with there regency inserts (and the many lookalikes.)
I have the I2400...
Here are the pics a little bigger.
Picked this wood up today as the road crews must have been cutting.
Wood is on the lite side for its size, but is very wet.
Any guesses as to what it...
Thanks for the replies.
my glass gets dirty in the two bottom corners.
I don't believe there is any kind of seam in the back corner, but
Been using my regency i2400 for a while now, and seem to be getting some creosote
buildup in the firebox itself. Mostly the back corners and the top...
Thanks for all the replies. I will keep you guys posted on how
I make out. As to the utility company land, I was more inquiring
along the lines of...
Hey all you CT guys, does anybody know where you can
get firewood cutting permits for state and also utility
company land in central CT.
I have read alot on here about monitoring your stove temperature
with a thermometer on the flue. Is it a good idea to watch the temps
on an insert,...
Getting ready to install my Regency 2400 insert and want to run a few questions by everybody.
First, I was told the liner should fit inside the...
Separate names with a comma.