Separate names with a comma.
I like em eight inches those seem the best, twelve is a little too much for me.
I have an insert with a fan but only use the fan when it gets below 40* f. I also like the look of a free standing stove in or in front of a...
Oh yea. 6 foot 3wt bamboo and a 7 foot 2wt T&T
ms460 new never used 20" bar and chain $1200 or BO.
Mastermind ported ms 261c moronic 16" bar and chain excellent condition 10-15 tanks $800 or BO.
Personally I would get the best saw you can afford, you will be happy with a 555 with an 18 or 20" bar would keep you smiling for a while.
What do you want it installed free, they gotta make a living too. I paid an established dealer a little more than that and 7 years later I'm glad...
The .325 chains are the same as 3/8 or what ever else is out there. And if there is a good stihl dealer close by why not just get yourself a...
Do you have a temp gauge and if so how hot is your stovetop.
When we did our stove the owner of the stove shop came to our house and gave us his recommendation, best thing I ever did. Oh and he did not...
How many pieces of wood are you putting in.
I'm sure they use them like their gonna trade them in, for a couple of extra bucks you can get your self a pretty little saw and piece of mind.
I zip tied some extra weed wacker strings to the rod right below the head.
Mine cruises between 600-700 and maybe a tad over. If your manual says 600 I'm sure your good to 800.
If you are home you should keep a nice hot fire going to bring your house temp up, fans on inserts are overrated. I have an insert and don't...
Something like 16x24.
I cut all my wood 13-15" and stuff my stove full straight in north to south.
Is it possible to move the stove upstairs.
I think you need more wood in your stove.
Echo timberwolf is your best bet, otherwise your not gonna get much more than what you already have, good luck.
I run my insert without the fan all the time, not a big deal. I don't think it does much to keep it from over firing. If your that worried just...
Hey I know I don't post much here but my stove top has been cruising at about 600-750 and was wondering what most of you guys and gals run your...
Your best best will be a 90cc saw for milling, you will regret getting anything smaller. A husky 390 or 395 cost about the same as a 461. Check...
New cable should not fray.
My mm sits in my junk draw, CSS 12-18 months is my new mm.
I use a Dremel with the appropriate sized sharpening stone and then a lite touch with a round file, just take your time and steady up your hand.
Bonus room is 13x26 with two 5x5 dormers and the chimney would probably be about 15' or what ever the stove guy thinks is best.
I have a two story 3200 sq. ft. Center hall colonial with a bonus room over the garage and would like to install a second stove in this room,...
Get yourself a nice 70cc saw