Separate names with a comma.
Has been a great stove!!
Bought it in 2008 when oil was $4.00/gal+
Well combustion fan finally decided it was time to retire...
Ordered a fan...
Decided to fabricate a high temp gasket per this video:
I did go with his 2 layer approach.(a bit thick though) Wanted a reusable gasket...
Ignitor measures 49 ohms. No glow and no start.
Supply volts are 120.
Power to ignitor from relay or transistor?
May have an issue with the igniter circuit but need to understand the timing during startup.
I measured the igniter and had about 49 ohms....
Just changed our new to us stove from mode A to mode C.
Can anyone explain what these modes are all about?? (A,B,C,D)
C vs A: WOW what a...
Working out a deal for a 25-PDVC
The P61 is working well for first and second floor but the basement is another story.
Thinking of sacrificing a...
Just finished installing new ash door gasket. Glass gasket is next. On order...
Does 5 years sound about right for the lifespan of gaskets?
Figured it would be a good time to do a test run for Winter #6 with the P61.
No issues. :)
Anyone else give in to the "cooler" temps?
Just finishing our 5th year/20 tons and looks like the gasket is going bad.
Can supply pictures too. Can see a path from dirt buildup to glass...
Finished cleaning today. First time since mid-October
Ash pan about 2/3 full; cleaned combustion fan blades; temp probe; exhaust pipe;
SIB called yesterday to set up delivery.
Set up for April 28. Hopefully the stove will not be running then!
But, if it is......
Just finished putting ton #3 in basement. Have one more on order. MWP softwood.
Feels like Fall out there.:eek: Cloudy; light winds and temp @40....
Did a quick calculation and was wondering what you thought.
Softwood $260/ton and Hardwood $210/ton
Same house/weather/# of tons (4)...
Ordered 3 tons standard MWP from SIB to be delivered on Tues. $215/ton delivered.
Also ordered 1 ton of MWP Softwood which should be available...
Check this out:
Check out link:
Me and the dogs settled in by the stove. Hot coffee too!
Top of stove helps keep cup warm.
Looks like 2 bags/day. 4 tons may not last till Spring....
Yup one month after warranty for electrics is up igniter is bad.
Will check with dealer today. Hopefully they will cover it anyway.
A new pellet stove owner at work(2nd year) almost had
a serious situation. He had flames shooting out of the seams
of his exhaust pipe. Pipe has a...
Does everyone have power back?
We lost it for about 7 hrs last night. 59 in the house when power came on.
Tried to run a test burn yesterday. Stove would not feed pellets.
I found that the slot in the slide pate was not lined up with the pusher arm....
Sale price is $199 for September while supplies last.
Received email on Monday
46 this AM but did not run the stove!
Wife would not...
Northern Lights out of Farmington came over this week and installed the new board.
Old one had a dead spot on temp control around 72Deg. Also the...
Crazy weather this year!
Glad to see pellet prices holding on the low side.
Oil prices are around $3.40/gal. Hope it drops a bit more before Fall....
Just wondering if this could happen. Would you require fewer pellets
to attain the same heat output by using inside air?
Or, would the air that...
Called last week to get the budget plan price for 2011-2012 heating season.
$3.69/gal vs $2.89/gal last year
Pellet price went up $10/ton for...
NOAA's forecast for Western Maine.
Talking about putting 2nd stove in basement. We have a single flu chimney which had the furnace and Memco wood boiler hooked to when we bought the...