Separate names with a comma.
Do yourself a favor and get a better extension cord...
How much wood is that roughly? Looks like over a cord easy.
I have one of each. Cordless is very handy if you only have a few cuts to make.
But If you're going to doing a lot of work I get out the corded...
There's a reason why they're called "pull-on"...
Spend a few extra dollars and you will be able to work smarter, faster and easier.
Make sure all your gasoline(high test) has stabilizer in it for ethanol. Other than that I try to start my equipment at least once a month,...
My first choice would be the 455 rancher with an 18" bar. You'll have to come up with a few extra dollars.
I have never ran an echo but hear a...
I have the same problem, don't want to put the female end over the collar of my stove(top exit) and have creosote leaking on top of my...
$160 for a face cord???????
Anyone have experience with this one? Log lift and working table for <3k.
Does that sharpener work with skip tooth chains??
Can anyone recommend a small electric
(I know, light up the woodstove, but it's not cold enough yet.)
I am on Amazon and I see...
Yep, I am running 285s. Truck weighs 7k lbs. I was over 13 at the scale.
Mud-Terrain T/A KM2 285/75R17 tires weigh 62 lbs, have a max load of...
E rated tires. Was the truck overloaded? Of course. Every spring I go get 2 scoops of gravel for the driveway.
I guess I am an evil over loader!
Here's big blue. 2012 ram 2500 with some bfg muds and a backrack.
Impossible to overload with wood.
I've had over 3 tons of...
Surface mount some fluorescent strip lights if you're worried about air getting past. They will give your more even light too than can lights.
I rented a pull behind 1 man model with a 12" auger and did about 20 holes in less than 4 hours. It really wasn't that bad until you started...
I use scrap lumber too but eventually it does run out. I always keep a few dozen super cedars around when
I want a fire fast. They light much...
No natural gas, I wish. I would run everything off it!!
Thanks for the info. I was weary of the sportsman and the power they put out. I...
Which model did you decide to go with? Any problems with the cleanliness of the power it puts out?
For a variety of reasons we are considering purchasing the LP5500 portable generator. I was wondering if anyone on here has already purchased one...
The 455 are nice saws. They run better with an 18" bar. Skip the 460
+1 for the 372xp with the 24" bar. It has plenty of power but not nearly as heavy as the bigger bore saws
Sounds like you want more of a data logger.
I like my infrared thermometer. My magnetic thermometers are terribly inaccurate. They are the imperial ones from lowes
I think u need to isolate one of the commons from one transformer. The hot wire should call for heating or cooling
Bust the wheels up with sledges and wedges. A home lite 5 ton should take care of the rest. I'm super happy with mine!
Since I got a leaf blower it seems like I use it for everything, gutters. Truck bed.
A few good pairs of pliers for the rings. An extendo magnet thing is always handy. I also like to put the bolts in a magnetic bolt tray.
I wouldn't waste my money on them but I am partial to huskys. They will work if u are cutting small stuff once in a while but that's about it.