Separate names with a comma.
Thanks Don. I'll inspect the Auger also.
I used the sawzall, it took about 3 seconds to cut the shaft. This was the best way to remove the motor and fan blade, I'm replacing it all...
I need to replace my combustion blower. The set screw holding the fan blade on the shaft will not come loose any ideas?
I rechecked the fines box and found the slide plate had become dislodged. I can't figure out how that happened. I reassembled and now all is...
My Auger will not spin. I tried moving chain manually and there is alot of resistance and will barely move in either direction. I removed all...
I evacuated the hopper and believe it was a extra long pellet jamming the slide plate. All seems to be corrected. Thanks Don for the quick response.
My Auger is turning, Hopper is full. All fans working, all doors closed. I don't hear pellets falling. What's the problem???
Can someone advise how to change an Igniter in a P68. I have changed one in my Harman Advance, now I need to change a relatives P68. Thanks in...
I recently purchased a replacement rope gasket for a Harman Advance ash drawer. I can easily pull the old one off, but not sure how the new one...
A Blue flame is a hotter flame, may not be a bad thing.
Can anyone advise instructions or a link to replacing an auger motor on the Harman Advance. I purchased an OEM motor online which I should have in...
I have an 8 year old Harman Advance (original owner). Just recently, within the past week it squeals upon initial start up for about 5-10 seconds....
It needs air. Give pot a good scraping.
Lowes usually has Greene Team. I saw them in Woodbridge NJ a few weeks ago,
Stove is not completely cool, and ash is not completely out before 8 hours. Be careful with the vacuum.
Welcome aboard! You won't be disappointed.
Honda EU Series is the best. Inverter with sine wave technology is the safest for the stove. I have an EU2000I, and have used it with my Harman...
Best pellet I've burned!
OK, got it! A couple of taps with a hammer and a pull. 5 seasons without taking it off and it was only about 30% full of fines. For those...
Yes, it is the cover for the fines box. Wingnut is in the center. I've never taken it off (approx 5 Yrs). I 'll have to gently pry it loose. Thanks.
Only wingnut behind rightside rear panel.
I removed the wing nut behind the stove but i can't get the metal plate off, any suggestions?
"Crews opened a hole in the house and sprayed foam inside, putting the fire out."
Scrape the pot. It needs air.