There were some questions on another thread about the throw of my old splitter. I measured today while setting up to split some tomorrow & here are the results:
In the open position, measuring from the middle wing to the foot it's 21"
In the lowered position it's 13"
I looked in my owners manual & my JD provides 16 gpm at 2250 psi. My splitter uses a 4X8 cylinder so the cycle time is reasonably fast, in fact it's faster than I can usually reposition the round:
Here's the splitter at roughly half stroke:
Three quarter stroke:
And full stroke:
In the open position, measuring from the middle wing to the foot it's 21"
In the lowered position it's 13"
I looked in my owners manual & my JD provides 16 gpm at 2250 psi. My splitter uses a 4X8 cylinder so the cycle time is reasonably fast, in fact it's faster than I can usually reposition the round:
Here's the splitter at roughly half stroke:
Three quarter stroke:
And full stroke: