44 elite owner looking for the right door gasket

Post in 'The Hearth Room - Wood Stoves and Fireplaces' started by hughmyster, Feb 20, 2009.

Thread Status:
Not open for further replies.
  1. hughmyster

    hughmyster
    Expand Collapse
    New Member

    Joined:
    Feb 20, 2009
    Messages:
    24
    Likes Received:
    0
    Loc:
    central ct
    Love my 44 elite and noticed short and more hot burns. noticed door gasket was shot. I tried the thinnest gasket tape and couldnt get the door closed. I took that off the found the thinnest flay gasket cemented it on and still have alot of trouble closing the doors. The question i have is the door gasket made for my 44 elite a special type only available from the dealers? If not what could i use?
     
    Collapse Signature Expand Signature

    Helpful Sponsor Ads!





  2. Matt_W

    Matt_W
    Expand Collapse
    New Member

    Joined:
    Sep 26, 2007
    Messages:
    20
    Likes Received:
    0
    Loc:
    20 mile West of Pittsburgh
    When I replaced my door gaskets on my 36 elite I tried a few off brand gaskets like you and could not find anything that would work so I ended up going to the dealer. Do you have washers that can be moved on the door latch to maybe help pull the door a little tighter?
     
    Collapse Signature Expand Signature
  3. hughmyster

    hughmyster
    Expand Collapse
    New Member

    Joined:
    Feb 20, 2009
    Messages:
    24
    Likes Received:
    0
    Loc:
    central ct
    i tried that and when it cooled down i snapped the dor handle because it was so tight.
     
    Collapse Signature Expand Signature
Thread Status:
Not open for further replies.

Share This Page