6 zone radiant really about 8?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

shagbark

New Member
Hearth Supporter
Sep 29, 2008
7
south central, ky
Zone 1 approx 750 sq feet of storage are in basement kind a garage area maybe will put 1000 gal storage here also in future in slab hydronic.
Zone 2 approx 900 sg ft of kitchenette, recreation room, and bathroom in slab hydronic
Zone 3 approx 900 sg ft of two bedrooms an office and theater room in slab hydronic
Zone 4 DHW side arm in a 50 or 80 gallon electric
Zone 5 Plenum heat exchanger for 2600 sq ft main floor
Zone 6 Master Bath under floor staple up to subfloor/tile floor hydronic with floor temp thermostat 180 sq feet
Zone 7 Kitchen breakfast area and mud room 450 sq ft under floor staple up to subfloor/tile or brick paver floor in floor temp thermostat
Zone 8 Kids bath underfloor staple up to subfloor/tile hydronic with floor temp thermostat 100 sq ft

Zone 6,7,8 are for the convienenc of heated tile floor zone 5 exchanger will be primary heat in these rooms also. I will probably have to reduce blower fan speed and damper the air duct runs to these areas?

Is there a better way than 6 zone valves or pumps and manifolds for the 6 radiant zones.

all opinions are needed and greatly appreciated.
Thanks in advance
Shagbark
 
Status
Not open for further replies.