Hello Listers,
Recently I joined Hearth.com and was assisted trouble shooting some strange behavior on my Advantage II combustion issues. Maybe someone knows the answer to this:
I have bypassed the control board and have the combustion fan running direct to an AC outlet with fuse. The current draw is a consistant 0.9 amps measured with my fluke meter. The motor functions fine but the case gets pretty hot, probably 140deg/f. I can touch it without burning my fingers, but it is uncomfortable.
When the stove is running, how hot does the case of the combustion motor get?
Thanks in advance,
Grant
Recently I joined Hearth.com and was assisted trouble shooting some strange behavior on my Advantage II combustion issues. Maybe someone knows the answer to this:
I have bypassed the control board and have the combustion fan running direct to an AC outlet with fuse. The current draw is a consistant 0.9 amps measured with my fluke meter. The motor functions fine but the case gets pretty hot, probably 140deg/f. I can touch it without burning my fingers, but it is uncomfortable.
When the stove is running, how hot does the case of the combustion motor get?
Thanks in advance,
Grant
