All PE Stove or Insert owners please read.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Hogwildz

Hogwildz

Minister of Fire
Nov 3, 2006
9,233
Next to nuke plant Berwick, PA.
Any & All members that own Pacific Energy Inserts or Stoves.
Please check your stove for cracked welds. More than just a couple of us owners have found cracked welds, typically at the upper door opening knife edge corner welds, some may be inside at that area, and also the face up in same area. Please check and post findings at the following thread................
https://www.hearth.com/econtent/index.php/forums/viewthread/42141/
 
Status
Not open for further replies.

Similar threads

Y
Does my fireplace chimney flue look good for installing a wood stove insert with a flue? (just swept it)
Replies
22
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
yuryk
Y
jameshowison
Cement board to cover gap for small insert stove?
Replies
2
Views
823
The Hearth Room - Wood Stoves and Fireplaces
jameshowison
jameshowison
T
High Mountain Stove options
Replies
35
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
Newbie78
N
V
Clearance question and use of insulation for new gas insert
Replies
5
Views
510
It's a Gas!
vatsals
V
H
Wood Stove Recommendation for Super Funky Fireplace in an Open Floor Plan - Osburn Inspire?
Replies
3
Views
1K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Top Bottom
Back