Anyone ever use Naval Jelly on a lightly rusted old stove?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

X-Raycer

Member
Dec 30, 2013
11
Appalachian KY
I was thinking of using Naval Jelly to remove light surface rust on an old Fisher Momma Bear.
I've read that it turns red oxide (Fe2O3) to black oxide (Fe3O4).
I've read also that after 15 minutes of application & rinsing with water and allowing to dry, that the black oxide that remains is paintable.

Anyone have experience with this process?

Thanks
Rich
 
i always just clean the rust off with a wire wheel the naval jelly seems like more trouble
 
I wet them down with PB Blaster a couple hours before wire wheeling. Seems to loosen it and cuts down on the dust. Too wet will spatter.
Thought about Navel Jelly, but couldn't bring myself to put anything caustic on them.
 
Wire brush. Get it hot. Apply Crisco. Done.
 
Wire brush. Get it hot. Apply Crisco. Done.

Crisco ??
Mama Bears were painted black (Satin) OR brown. (Stove Bright Bark Brown)
We're not talking cook stove tops here.
 
Status
Not open for further replies.