Austroflamm got me stumpped

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
smwilliamson

smwilliamson

The Stove Guy
Dec 28, 2009
4,532
Southcoast, MA
www.pellet-stove-parts-4less.com
Auger continually feeds. The auger turns ever so slightly all the time and then pluses to a stronger turn every time the control energizes. Swapped out the mother board and adjusted the feed trim. Thinking that the daughter board controller is to blame here, any thoughts?
 
Sounds like a leaky triac or driver to me. Is the triac on the daughter board?
 
  • Like
Reactions: jtakeman
Daughter board. Just had a customer with a very similar problem which for that is generally always either the daughter board or the control board and you already tested the control board.
 
Status
Not open for further replies.

Similar threads

I
Quadrafire Castile Fans won't stop no pellet drop
Replies
2
Views
520
The Pellet Mill - Pellet and Multifuel Stoves
Former Farmer
Former Farmer
W
Heatilator PS50 auger not powering on
Replies
1
Views
745
The Pellet Mill - Pellet and Multifuel Stoves
Wb99
W
RedDig
Quadrafire Santa Fe Got me banging my head against the wall!
Replies
11
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
RedDig
RedDig
S
Harman p43 igniter fails to light.
Replies
7
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
shtrdave
S
K
Lennox Montage 32FS -- Troubleshooting erratic electrical issue
Replies
4
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
KeepinWarmInTheMidwest
K
Top Bottom
Back