Avalon 900 PI

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

jrogers861

New Member
Jan 4, 2017
2
Brookfield CT
I have an older avalon pellet stove 900 PI........every other start it will run but shut down until I restart the toggle switch.
It will then run fine until next startup

I changed the main 3-wire snap switch---no help
I changed the low temp snap switch--no help
I by-passed the backdraft sensor----no help

I replaced the 15 minute timer block in the control box-----no help

If I start it----let it come to temperature---all goes on----and at that time re-toggle the start switch---I won't have a problem.

Really not a major problem---but driving me crazy.......

I love this stove but my better-half is pushing to buy a new one-----anyone pleas help--
 
No nothing about your stove
But on mine if that happened I would be looking at the proof of fire switch
First 15 min cycle not getting it hot enough . Second cycle does bring it up to temp
1 possibility Good Luck and welcome to the forum
 
No nothing about your stove
But on mine if that happened I would be looking at the proof of fire switch
First 15 min cycle not getting it hot enough . Second cycle does bring it up to temp
1 possibility Good Luck and welcome to the forum
The two switches i replaced took care of the proof of fire switch replacement