We purchased a house a few years ago that had an Avalon Astoria pellet stove installed. So not sure of year it was placed in service but has worked great up to this point. Starting up this year it has no problem firing and running for the first cycle, but after thermostat kicks stove off it will not light on the second cycle. Fan kicks on, pellets flow into pot, but will not relight to continue burning. We just replaced the ignitor and worked perfect for one day, now the problem is back. Will not fire back up after cycling off (but can manually turn back on and fire if wait for it to cool and remove overflow of pellets)- Any ideas?? missing the continual operation of having it on thermostat.
Avalon Astoria firing problems - help!?!
- Thread starter Nestoria
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Lake Girl
Moderator
Have you checked wiring to ignitor with a meter to ensure integrity? The only other thing would be the board. There are services that can repair them ... try using the search box top right. If you buy new, I would still repair the old for backup.
Troubleshooting guide travis industries website
Troubleshooting guide travis industries website
- Status
Similar threads
