1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)

Bar for husky??

Post in 'The Gear' started by stoz, Mar 9, 2006.

Thread Status:
Not open for further replies.
  1. stoz

    stoz New Member

    Joined:
    Feb 2, 2006
    Messages:
    36
    I bought a 357XP husky and I am looking for a 20" bar for it, I can't seem to find out what the bars are that will fit it, been looking on ebay and such and most don't say what saw they fit. Any help app. Also what is the preferred bar for this saw.

    Scott

    Helpful Sponsor Ads!





  2. MuckSavage

    MuckSavage Member

    Joined:
    Jan 31, 2006
    Messages:
    81
    Loc:
    South Jersey
    Take a look at www.npeco.com On the page with your saw, at the bottom you'll see a page for bars & additional accesories.
  3. Eric Johnson

    Eric Johnson Mod Emeritus

    Joined:
    Nov 18, 2005
    Messages:
    5,745
    Loc:
    Central NYS
    Unfortunately, there's not much standardization when it comes to bars and various saws. Take MuckSavage's advice, or see a saw dealer. Ebay is great, but only if you know exactly what you need. You might also check the Oregon (Blount, Inc.) website. There should be a section that tells which of their bars fit which saws.
  4. stoz

    stoz New Member

    Joined:
    Feb 2, 2006
    Messages:
    36
    Thanks Muck, knew it had to be there somewhere.

    Scott
  5. MALogger

    MALogger New Member

    Joined:
    Feb 27, 2006
    Messages:
    147
    Loc:
    Foxboro, MA
    Hi Scott

    ORPM 20 CJ50
    That is the part number for an Oregon 20" (.050 gauge) Powermatch bar that will fit the 357xp.

    Hope that helps.

    http://www.baileys-online.com is a good place to get one.

    Good Luck

    Craig
  6. stoz

    stoz New Member

    Joined:
    Feb 2, 2006
    Messages:
    36
    All ready ordered it from Baileys yesterday, tired of finding one on ebay.

    Scott
Thread Status:
Not open for further replies.

Share This Page