Q&A Bedroom-size Fireplaces

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

QandA

New Member
Staff member
Nov 27, 2012
0
Question:

Re: Locating Bedroom-size Fireplaces I would like to include a gas fireplace or stove into a new bedroom renovation but all the units I have found are 18,000 btu plus. For 350 sq. ft. in southern California, aren't these units too large? I was considering 8-12,000 btu max. Are such small units readily available?



Answer:

The problem with smaller units is that the flame is often not very visible. What you have to do is look for a LESS efficient fireplace. You might find one that is 25,000 BTU, but puts out less than 12,000 into the room.

Heat n Glo used to make a fireplace with a "heat dumping" mode. This was a full size unit, but could put the heat up the chimney instead of into the room.

You will probably have more luck with fireplaces than with stoves. Start with http://www.heatnglo.com

Another option is a wood burning pre-fab fireplace with vented logs in it. vented logs put most heat up the chimney. However, be sure to include enough combustion air in the room for these.


Link: Heat and Glo Web Site
 
Status
Not open for further replies.