breckwell BigE fuse.

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

MSmith66

Feeling the Heat
Feb 5, 2008
438
Central NY
Fuse blows when stove is plugged in. Combustion blower is good, control board is good. Checking convection blower and auger motor.

Thanks in advance.
 
check your ground wire at the adapter that connects to the stove. If not that it should be the igniter, as Pete said.

Eric
 
check your ground wire at the adapter that connects to the stove. If not that it should be the igniter, as Pete said.

Eric
Quick test for the ignitor is to unplug one ignitor lead and see if the stove will attempt start-up w/o blowing fuse.
 
Status
Not open for further replies.