I cleaned the stove yesterday..firebox..glass..and took the two clean out doors off at the back of the stove to get to the channel leading to the exhaust fan. Nowbi cant get the left side cover that covers exhange tubes to set right..any ideas? It seems lime somethingb is stopping it and is always about 1/8 of an inch higher than the right one? Any help is appreciated..
cb 1200 i..exchange tube cover
- Thread starter PAV1
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
SmokeyTheBear
Minister of Fire
Can you post a picture?
I'd look for crud, at the bottom as a first guess, stopping it from seating properly.
I'd look for crud, at the bottom as a first guess, stopping it from seating properly.
- Status
Similar threads
