Chain brake jammed

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

daviddep

New Member
Sep 17, 2009
8
Cicero, NY
I'm running Husky 55 Rancher. I dropped saw and now the clutch cover won't go back on cause the clutch brake metal loop is too tight. I dont' know how to move the brake mechanism to losen it back up. There is a spring mechanism. How do you adjust in order to put back together?

Thanks
 
Fixed. was able to get just enough of the cover over the chain brake 3 tooth knob by standing on it and then was able to releae the brake on unit.
 
Good to hear Dave but does the break still work properly? It's important that it'll lock as designed and you can ...with minimum effort unlock it.

Check that out with the saw off.
 
Status
Not open for further replies.