Corner install help

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

franco robledo

New Member
Oct 23, 2013
2
Boston (Chinatown) MA
Hi guys,
I have this corner for a future harman stove install. Question is the venting. I need your feedback. Thank you.

There is an electricity meter on one side and an oil pipe to the basement on the other side by a window.

A) straight out
B) up 4 feet and out
C) roof exit

See pictures
 

Attachments

  • image.jpg
    image.jpg
    258 KB · Views: 99
  • image.jpg
    image.jpg
    131.6 KB · Views: 95
  • image.jpg
    image.jpg
    138.1 KB · Views: 113
Facing corner ,with the stove at a 45 deg. angle. I would put the "OAK" out the right wall. And the exhaust out the left wall. Running the exhaust out to clear the outside wall about 12 inches to a clean out tee than up about 6 to 8 feet to termination cap .
 
Status
Not open for further replies.