Hi all, was wondering if someone could tell me what each of the dip switches does on the PB105?? I know they control the amount of pellets on startup (at least some of them do) but I would like specifics. I am trying to have the least amount of pellets possible fed in so that they don;t smolder so much prior to startup. I notice quite a bit of smoke when mine starts up from a cold or colder start. Thanks for any help.
Dip Switches
- Thread starter pearlset79
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
What I have been told the 3 Dip switches change the initial burn pot charge times. (Default setting #1Off #2Off #3Off) (Less 21.3 seconds #1Off #2Off #3On) ( Less 42.7 seconds #1Off #2On #3Off) (Less 64 seconds #1Off #2On #3On) (More 21.3 seconds #1On #2Off #3Off) (More 42.7 seconds #1On #2Off #3On (More 64 seconds #1On #2On #3Off) (More 85.3 seconds #1On #2On #3On)
u4015
Member
Can anyone verifiy that these settings, for the dip switches, are correct for all PB105s. I been looking for a simple answer to these silly switches for 2 years.
- Status
Similar threads
