just installed eko 40 stove , I have no idea how to set the control to run efficiently, and I also seem to have a build up of creasote inside fire box can someone help me out
eko 40
- Thread starter potlicker
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
BoiledOver
Minister of Fire
Hello and welcome to the Hearth forums. Pay no mind to the creosote in the upper (primary) combustion chamber as that is what comes with the gassers. If you see any in the lower (secondary) combustion chamber or in the exchange tubes, then you will need to rectify that as it indicates a problem.
NateB
Feeling the Heat
I think there is a stickie on how to change the settings. I don't have it in front of me but if you need a link let me know.
maple1
Minister of Fire
An Eko 40 is a boiler or hydronic heater, not a stove.
Was it installed with return temperature protection? Storage?
Was it installed with return temperature protection? Storage?
- Status
Similar threads
