1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Hearthstone Soapstone and Cast-Iron stoves( Wood, Gas or Pellet Stoves and Inserts)
    Caluwe - Passion for Fire and Water ( Pellet and Wood Hydronic and Space Heating)

Finding Micore in Southeast CT

Post in 'The Hearth Room - Wood Stoves and Fireplaces' started by blel, Aug 3, 2008.

Thread Status:
Not open for further replies.
  1. blel

    blel Feeling the Heat

    Joined:
    Jun 6, 2008
    Messages:
    271
    Loc:
    Southeast CT
    Anyone know where to find Micore in SE CT, or RI? I've looked around quite a bit but no luck.

    Helpful Sponsor Ads!





  2. begreen

    begreen Mooderator Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    48,075
    Loc:
    South Puget Sound, WA
    Here's some listings from http://www.gypsumsolutions.com/htmlID/micore.asp :
    Connecticut
    ATLANTIC PLYWOOD CORP
    1590 JOHN FITCH BLVD
    SOUTH WINDSOR, Connecticut 06074
    Phone: 800-877-2759
    860-291-8020
    Fax: 860-291-8014
    or
    Rhode Island
    ATLANTIC PLYWOOD CORP
    1 NOYES AVE - UNIT 2E
    EAST PROVIDENCE, Rhode Island 02916
    Phone: 800-292-6766
    401-434-2422
    Fax: 401-434-2195
    Website: www.atlanticplywood.com

    # Micore
    E J DAVIS CO
    10 DODGE AVE
    NORTH HAVEN, Connecticut 06473
    Phone: 203-239-5391
    Fax: 203-234-7724
    Website: www.ejdavisinsulation.com
  3. blel

    blel Feeling the Heat

    Joined:
    Jun 6, 2008
    Messages:
    271
    Loc:
    Southeast CT
    I previously tried Atlantic in Providence and they are a distributor and don't sell retail. They couldn't tell me any stores that stocked it. Big help aren't they. The one in North Haven is also a dist but maybe they can tell me who stocks it. I'll try on Mon
    Thanks
  4. begreen

    begreen Mooderator Staff Member

    Joined:
    Nov 18, 2005
    Messages:
    48,075
    Loc:
    South Puget Sound, WA
    Check local insulation supply companies too.
  5. Tfin

    Tfin New Member

    Joined:
    Jul 24, 2007
    Messages:
    556
    Loc:
    Central Maine
    I had a local building supply order it for me.
  6. brider

    brider Member

    Joined:
    Jun 13, 2008
    Messages:
    119
    Loc:
    New Haven, CT
    I just got off the phone with Sue at E.J. Davis Co. They sell Micore 300 for $.65/sq ft, or $20.80 for a 4x8 sheet, I think that's 1/2" thick. In my case, 1/2" would be sufficient.

    Their hours are 7-3, so you just have to call ahead so they can pull what you need, show up at the office and pay, then go to the warehouse to pick up.

    I'm not that far, so that's what I'm going to do.
Thread Status:
Not open for further replies.

Share This Page