Harman P61A feed rating

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by chud, Jan 6, 2011.

Thread Status:
Not open for further replies.
  1. chud

    chud
    Expand Collapse
    New Member

    Joined:
    Jan 6, 2011
    Messages:
    17
    Likes Received:
    0
    Loc:
    Central/Southern maine
    Can I keep the feed rating on my Harman P61A at the lowest setting? I am new at this and it seems to me the higher number setting simply means it feeds more pellets at a faster rate?
     

    Helpful Sponsor Ads!





  2. SmokeyTheBear

    SmokeyTheBear
    Expand Collapse
    Minister of Fire

    Joined:
    Nov 10, 2008
    Messages:
    13,363
    Likes Received:
    1,662
    Loc:
    Standish, ME
    It is a maximum feed rate limit, not the rate at which it will feed all of the time it is feeding.

    The controller will control that. As the sensors on the stove indicate that the set point is being reached the stove will throttle back, if there is a large difference between what the sensors see and the set point the feed will be increased up to that maximum feed rate.
     
    Collapse Signature Expand Signature
  3. chud

    chud
    Expand Collapse
    New Member

    Joined:
    Jan 6, 2011
    Messages:
    17
    Likes Received:
    0
    Loc:
    Central/Southern maine
    So all it means is that a higher setting will initially push more pellets into the burn pot but then throttle back on its own?
     
Thread Status:
Not open for further replies.

Share This Page