Help with Integra 1 F/S

Post in 'The Pellet Mill - Pellet and Multifuel Stoves' started by jkrivv, Nov 14, 2012.

  1. jkrivv

    jkrivv
    Expand Collapse
    New Member

    Joined:
    Nov 14, 2012
    Messages:
    2
    Likes Received:
    0
    My fiancee and I have an Integra 1 (Austraflamm) and have replaced the air sensor, high & low limits switches, circuit board and cleaned the unit, including the stove pipes. We are still having issues with it running properly. In the start up cycle is runs well, then eventually the auger runs irradically. Any ideas on what it could be? Hall sensor maybe? Any advise is appreciated!
     

    Helpful Sponsor Ads!





  2. smwilliamson

    smwilliamson
    Expand Collapse
    Minister of Fire

    Joined:
    Dec 28, 2009
    Messages:
    4,411
    Likes Received:
    747
    Loc:
    Southcoast, MA
    Sounds like you have narrowed it!
     
    Collapse Signature Expand Signature
  3. jkrivv

    jkrivv
    Expand Collapse
    New Member

    Joined:
    Nov 14, 2012
    Messages:
    2
    Likes Received:
    0
    I"ll keep you posted if that is the issue. Thanks for responding!
     

Share This Page

Entire Site copyright © 1995-2016 - email to webinfo@hearth.com
Hearth.com and HearthNet are property and trademarks of Hearth.com LLC Advertising Information