Husky chainsaw question

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
backpack09

backpack09

Minister of Fire
Sep 10, 2007
554
Rochester, Mass
The baffle on my muffler made its way off while cutting over the weekend. For the life of me I could not find the nut that held it on. I dug through my bolt buckets and found a nut that fits, but it closes off the exhaust ports. Is there a washer that goes behind the baffle? How much clearance do I need between the baffle and the muffler?

Thanks,
Dan
 
Thanks, but that didn't show the same muffler that my saw has.

I fixed it by just throwing a flat washer behind the baffle and bolting it back on. It seems to run just fine.
 
Status
Not open for further replies.

Similar threads

K
Deep clean Englander 25 PDVC exhausts into chimney?
Replies
3
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
Rascal08
R
Don2222
Aladdin Quadrafire - Fixing the center baffle in the fire box?
Replies
2
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
Don2222
Don2222
Bill in the U.P.
Stihl 661 on Logosol chainsaw mill without side cover?
Replies
73
Views
5K
The Gear
SpaceBus
SpaceBus
Dusty62
St. Croix Auburn won't fire up
Replies
6
Views
578
The Pellet Mill - Pellet and Multifuel Stoves
Alfred
Alfred
P
New Manchester Install
Replies
13
Views
511
HearthStone
p301
P
Top Bottom
Back